HL-05-U07A

双通道涡电流探伤光学影像组合筛选机

Optical image combined screening machine for dual-channel eddy current detection

参数规格

Specifications

裂纹检测精度：深度＞0.1mm 宽度0.06mm

Crack detection accuracy: depth＞0.1mm  width 0.06mm

参数规格

Specifications

本机台外观尺寸(长*宽*高)：

约2000mm*1800mm*2200mm

机台重量：约950KG

更换规格：约20分钟

检测范围：

长度:30-80mm   直径;10-80mm

速度最快可达50支/分钟

裂纹检测精度：深度＞0.1mm 宽度0.06mm

采用德国涡流主机

电源：交流单项220V  50HZ

功率：约6KW

Product Size(L x W x H):

About 2000mm*1800mm*2200mm

Machine weight: about 950KG

Replacement specification: about 20 min

examination range:

Length: 30-80mm diameter; 10-80mm

The fastest speed:50 / min

Crack detection accuracy: depth >0.1mm width 0.06mm

German eddy current host

Power: AC single 220V 50HZ

Power: about 6KW

可检测项目

Suitable for

表面划伤、淬火开裂检测(涡流检测)

○螺纹直径公差检测；○最大/最小对边公差检测；

○螺纹牙底径检测；○螺纹牙中径检测；○牙距检测；

○有无螺纹检测；○斜牙检测；○粗细牙检测；

○头部有无电镀检测；○头部真圆度测量；○内孔直径公差；

○搓牙有无到位检测；○各部位台阶公差检测；

○头部厚度公差检测；○总长度公差检测；○侧面开裂检测；

Surface scratching, quenching crack detection (eddy current testing)

○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection;○Threaded teeth bottom diameter detection; ○Threaded teeth median diameter detection; ○Distance detection between teeth;

○Thread or not; ○Oblique teeth detection;○ Teeth thickness detection;

○Electroplating detection or not on head; ○Head roundness measurement; ○Diameter tolerance of inner hole;○Detection for rub teeth in place or not;○ Step tolerance detection of each part;○Head thickness tolerance detection; ○Total length tolerance detection; Side cracking detection;