HL-05-ATWL-LS

光学影像、涡电流探伤组合筛选机

Combined screening machine of optical image and vortex current flaw detection

裂纹检测精度：深度＞0.1mm 宽度0.06mm

Crack detection accuracy: depth＞0.1mm  width 0.06mm

参数规格

Specifications

本机台外观尺寸(长*宽*高)：

约2000mm*1200mm*2300mm

机台重量：约850KG

更换规格：约30分钟

检测范围：

长度:10-60mm 直径：10-30mm

速度最快可达20支/分钟

裂纹检测精度：深度＞0.1mm 宽度0.06mm

电源：交流单项220V  50HZ

功率：约3KW

Product Size(L x W x H):

About 2000mm*1200mm*2300mm

Machine weight: about 850KG

Replacement specifications: about 30 min

examination range:

Length: 10-60mm Diameter: 10-30mm

The fastest speed:20 pcs / min

Crack detection accuracy: depth >0.1mm width 0.06mm

Power: AC single 220V 50HZ

Power: about 3KW

可检测项目

Suitable for

表面划伤、淬火开裂检测(涡流检测)

○螺纹直径公差检测；○最大/最小对边公差检测；

○螺纹牙底径检测；○螺纹牙中径检测；○牙距检测；

○有无螺纹检测；○斜牙检测；○粗细牙检测；

○头部有无电镀检测；○头部真圆度测量；○内孔直径公差；

○搓牙有无到位检测；○各部位台阶公差检测；

○头部厚度公差检测；○总长度公差检测；○侧面开裂检测；

Surface scratch and quenching cracking detection (Eddy current detection)

○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection;

○Threaded teeth bottom diameter detection;○ Thread middle diameter detection; Distance detection between teeth;

○Thread or not; ○Oblique teeth detection; ○Teeth thickness detection;

○Electroplating on head or not;○ Head roundness measurement; ○Diameter tolerance of inner hole;

○Detection for rub teeth in place or not;○ Step tolerance detection of each part;

○Head thickness tolerance detection;

○ Total length tolerance detection; Side cracking detection;

本设备用于检测高端螺栓外观尺寸、涡流表面探伤组合筛选机。

本机采用德国原装进口Ibg涡流主机

This equipment is used to detect the appearance size of high-end bolt, vortex surface flaw detection combination screening machine.

This machine adopts imported Ibg eddy current main engine from Germany.