※  发明专利产品

HL-05-GS20

悬挂式钢丝型光学影像筛选机

Optical image screening machine for hanging steel wire

参数规格Specifications

机台外观尺寸(长*宽*高)：

约2000mm*1000mm*2200mm

机台重量：约450KG      

更换规格：约5分钟

检测范围：

长度:5-30MM  

直径：1.5-5mm

可装3支CCD

速度最快可达1000支/分钟

电源：交流单项220V  50HZ

功率：约3KW

Size of machine (L x  W x H):

About 2000mm*1000mm*2200mm

Machine weight: about 450KG

Replacement specifications: about 5 minutes

examination range:

Length: 5-30MM

Diameter: 1.5-5mm

Can carry 3 CCD

The fastest speed：1000 / min

Power: AC single 220V 50HZ

Power: about 3KW

可检测项目Suitable for

○螺纹直径公差检测；○头部最大/最小对边公差检测；

○最大/最小对角公差检测；○螺纹牙中径检测；

○内孔与外圆同心度检测；○牙距检测；○有无螺纹检测；

○头部有无电镀检测；○斜牙检测；

○头部表面开裂（有油件、黑色、侧面开裂除外）；

○粗细牙检测；○头部针孔堵塞检测；○尾端尖锐度检测；

○牙数检测；○头部真圆度测量；○有无十字针孔 ；

○各部位台阶公差检测；○头部厚度公差检测；○Thread diameter tolerance detection; ○Maximum/minimum alignment tolerance detection on head ;

○Maximum/minimum diagonal tolerance detection; ○Thread middle diameter detection;

○Concentricity detection of inner hole and outer circle; ○Distance detection of teeth; Thread or not;○Electroplating on head or not; ○Oblique teeth detection;○Surface cracking on head (except for with oil parts, black, side cracking);

○Teeth thickness detection; ○Pinhole blockage detection on head;○ Sharpness detection of end;○Teeth number detection; ○Head roundness measurement;○ Cross pinholes or not;○Step tolerance detection of each part; ○Head thickness tolerance detection;