悬挂插针式分度盘筛选机
Screening machine for hanging needle dividing plate
可检测项目
Suitable for
○螺纹直径公差检;○头部最大/最小对边公差检测;
○螺纹牙底径检测;○最大/最小对角公测;○斜牙检测;
○螺纹牙中径检测;○内孔与外圆同心度检测;○牙距检测;
○内孔径有无毛刺检测;○头部有无电镀检测;
○有无螺纹检测;○头部表面开裂(有油件、侧面开裂除外);
○粗细牙检测;○内孔直径公差;○尾端尖锐度检测;
○有无焊点及焊点数检测;○头部真圆度测量;
○焊点面积检测;○各部位台阶公差检测;○梅花形状检测;
○头部厚度公差检测;○有无牙检测;○牙部长度公差检测;
○针孔堵塞检测;○有无十字针孔;
○Thread diameter tolerance detection; ○Maximum / minimum alignment tolerance detection on head;
○Threaded teeth bottom diameter detection;○ Maximum/minimum diagonal tolerance detection; Oblique teeth detection;
○Thread middle diameter detection;○ Concentricity detection of inner hole and outer circle; ○Distance detection between teeth;
○Detection for burr in internal aperture or not;○ Electroplating on head or not;
○Thread or not; ○Head surface cracking (except for with oil parts and side cracking).
○Teeth thickness detection;○ Diameter tolerance of inner hole; ○Sharpness detection of end;
○Detection for solder joint or not and the number;○ Head roundness measurement;
○Solder joint area detection; Step tolerance detection of each part; ○Shape detection of plum blossoms;
○Head thickness tolerance detection; ○Teeth or not; Detection of tooth length tolerance;
○Pinhole blockage detection;○ Cross pinholes or not;
参数规格
Specifications
本机台外观尺寸(长*宽*高):
约1000mm*1000mm*2300mm
机台重量:约650KG
更换规格:约20分钟
检测范围:
长度:30-100mm;直径:3-12mm
速度最快可达400支/分钟
电源:交流单项220V 50HZ
可装4支CCD
功率:约3KW
运转方式:连续运转方式
Product Size(L x W x H):
About 1000mm*1000mm*2300mm
Machine weight: about 650KG
Replacement specification: about 20 min
examination range:
Length: 30-100mm; Diameter: 3-12mm
The fastest speed:400pcs / min
Power: AC single 220V 50HZ
Can carry 4 CCD
Power: about 3KW
Mode of operation: mode of continuous operation